19 September, 2014: Measuring 4.1 x 7.8 x 5.2 inches, the ShareCenter DNS-325 shares the same simple and practical design as the DNS-323 with the two drive bays being accessible from the front. Just slightly lift the face-lid of the server up and you have full access and can install the hard drives without any tools. To remove them, you’ll have to pull the latches on the back of the server, which help push the drives out.
Also on the back, the server has just one Gigabit Ethernet port and one USB port. The USB port can be used to either host an external hard drive for additional storage or a printer. Note that most other servers we’ve reviewed offer two or more USB ports.
The DNS-325 supports any standard 3.5-inch SATA hard drives, as long as they are of 2TB or lower capacities. While the server recognizes 3TB hard drives, in our trials, it was able to see them only as 750GB drives. The hard drives can be configured in either RAID 0 or RAID 1. You’ll also have the options to use them as separate volumes or put them together in a simple JBOD setup. In our trials with two 2TB hard drives, the server could create a RAID configuration within just a few minutes, which is very fast.
Use “Undelete” to recover deleted files from D-Link ShareCenter Shadow DNS-325 NAS Server hard drive.
Use “Unformat” to recover data after format D-Link ShareCenter Shadow DNS-325 NAS Server external hard drive.
Use “Recover partition” to recover files if D-Link ShareCenter Shadow DNS-325 NAS Server hard drive partition changed or damaged or deleted.
Use “Full Scan” to recover lost files D-Link ShareCenter Shadow DNS-325 NAS Server if partitions show as “raw” or recover files which can not be found with “undelete”and “unformat” and “recover partition”, recover files from raw partition, recover files of partitons which are not NTFS, nor exfat, nor fat32.
For Additional Information Visit the Website at: http://partitionrecoverysoftware.cc/
